VigilLink VLDT-AP0808 handleiding
Handleiding
Je bekijkt pagina 18 van 39
- 16 / 37 -
As shown in the figure above, we choose IN5 as reference signals, in such case, we need
to connect the IN5 port of the processor to the terminal of the video conference. As the
reference signal after the AEC algorithm will be send to the far end by the terminal, we also
need to configure selected input channels in the matrix routing. The figure as below gives
an example of configuring the matrix routing.
5.11 Adaptive Noise Suppression
The 48kHZ full-band Adaptive Noise Suppression (ANS) algorithm can effectively increase
the signal to noise (S/N) ratio and suppress noises from the blower or air conditioner.
As shown below, by pressing the ANS module on the HOME page or the ANS tab
on the menu bar, you will enter the ANS configuration page.
The following figure shows the details of the ANS setting page.
Bekijk gratis de handleiding van VigilLink VLDT-AP0808, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VigilLink |
| Model | VLDT-AP0808 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6379 MB |
