Videotec MBXMP handleiding
Handleiding
Je bekijkt pagina 5 van 32
Instruction manual - English - EN
3MNVKMBXMP_1926_EN
Fix the support plate (01) to the pole sling, using the
4 at countersunk screws (02) with hexagonal socket
M10x20mm in stainless steel (A4 class 70) supplied.
01
02
Fig. 2
Make sure the thread are free of dirt and debris.
Apply a generous amount of threadlocker (Loctite
270) on the 4 threaded holes on the pole mount
adapter.
Tighten the screws.
Pay attention to the xing. Tightening
torque: 35Nm.
The thread compound must cure for one hour, allow
for this period prior to completing the installation.
Then, x the box on the plate using the 4 at washers,
the 4 grower washers in stainless steel and the 4
hexagonal head screws in stainless steel (A4 class 70)
M10x30mm supplied.
Fig. 3
Make sure the thread are free of dirt and debris.
Apply a generous amount of threadlocker (Loctite
270) on the 4 threaded holes on the plate.
Tighten the screws.
Pay attention to the xing. Tightening
torque: 35Nm.
The thread compound must cure for one hour, allow
for this period prior to completing the installation.
6.2 Fixing with the corner
adaptor
Fix the support plate (01) to the corner module
(02), using the 4 at countersunk screws (03) with
hexagonal socket M10x20mm in stainless steel (A4
class 70) supplied.
01
03
02
Fig. 4
Make sure the thread are free of dirt and debris.
Apply a generous amount of threadlocker (Loctite
270) on the 4 threaded holes on the pole mount
adapter.
Tighten the screws.
Pay attention to the xing. Tightening
torque: 35Nm.
The thread compound must cure for one hour, allow
for this period prior to completing the installation.
Bekijk gratis de handleiding van Videotec MBXMP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Videotec |
| Model | MBXMP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3181 MB |
