Vevor ZX0901 ITEM 50T handleiding
Handleiding
Je bekijkt pagina 9 van 80
WARNING!
Don't overstroke. overload, It May Cause
Cylinder Cannot Reset. Oil Leaking,
Equipment Damage Or Personal Injury.
1. Do Not Operate The Shop Press Beyond
Stroke.When You See The Limit Line Of
The Oil Cylinder, Please Stop Pressing
Down Immediately.
2. Do Not Operate The Shop Press Beyond
Rated Capacity.
3. Avoid Off-Center Loads.
4. Always Keep Hands, Fingers, And Feet
Away From The Jack Plate And Press Apron
During The Pressing Process.
MAINTENANCE
1. Caution: Always release load from the Shop Press before performing any
inspection, maintenance, or cleaning.
2. Before each use, inspect the general condition of the Shop Press. Check for
structural failure, loose, cracked, bent or damaged parts, misalignment or binding
of moving parts, and any other condition that may affect its safe operation. If
abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
3. To prevent rust, coat all exposed surfaces with a light weight oil.
4. Always keep the Arbor Plates and Press Apron area clean and free of oil and
other lubricants.
5. To clean, wipe with a clean, damp cloth.
6. When storing, keep the Shop Press covered with a clean drop cloth in a cool,
dry location.
Bekijk gratis de handleiding van Vevor ZX0901 ITEM 50T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | ZX0901 ITEM 50T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9741 MB |
