Vevor YY-F100-433 handleiding
Handleiding
Je bekijkt pagina 10 van 172
- 8 -
OPERATING METHODS
1. Giving pagers
When the pager is removed from the charging base, all LED will go out and
enter receiving mode. Please confirm the pager ID and give it to the guest.
Note:
● Pagers can go into service after 40 minutes of charging. (A full charge
takes 4 hours.)
● If the battery of the pager is low, it won’t respond to the call of the
transmitter.
● Since the pager is unable to show its remaining battery level, please give
a charged pager to the guest.
2. Calling pagers
● Input the pager ID of the receiver to be called on the keypad and press
the CALL button.
● The call can be stopped by pressing the CANCEL button on the receiver.
● Retrieving pagers and putting them back onto the charging base
The beep will stop after the pager is plugged back to the transmitter.
Note:
● The receiver can not respond to the call when charging.
3.Turn On/Off
●Put the extension back on the charging base, Type 99 and press the
CALL button to turn it off.
●Put the extension back on the charging base and replug it into the power
supply to turn it on.
ADDING ADDITIONAL RECEIVERS
To add additional receivers, it is necessary to purchase extra receivers and
transmitters. If you need to use more than 10 receivers, or if you want to
use two or more transmitters, please follow the procedures below to add
them. For example, add another transmitter (Transmitter B) to the
transmitter that is already in service (Transmitter A).
1. Confirming the host number of Transmitter A
a.Keep pressing the “Delete” button right after connecting Transmitter A to
Bekijk gratis de handleiding van Vevor YY-F100-433, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | YY-F100-433 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10796 MB |
