Handleiding
Je bekijkt pagina 6 van 128
- 5 -
①Setting for large compartment ②
large compartment
③
Setting button
④
Small compartment
⑤
Setting for small compartment
⑥Cooling
indicator ⑦ON/OFF button ⑧ Max/Eco
△Function Introduction
After power-on, the digital display screen will be fully lit for 1 second and
displayed normally. The default is the last memory function. The display screen
temperature figure will be permanently lit in the middle in standby mode.
1. Open and Close
After the power is turned on, the refrigerator will be in standby mode.
Now, press the ON/OFF button to open the refrigerator. After the refrigerator is
opened, the display will show the current temperature of the storage room. It will
start running.
Warning: The displayed temperature is only the temperature around the sensor.
The temperature of different points in the storage room is different.
Therefore, this is normal if the displayed temperature differs from the measured
temperature.
Press the ON/OFF button when the refrigerator is running, and the refrigerator will
return to standby.
2. Temperature Setting
1) Switch on the fridge, press to raise the set temperature and
to
reduce the
storage compartment's temperature. Each press will change by 1 ℃, and the maximum
can be set to 10 ℃, and the minimum can be set to - 20 ℃. Please note the clapboard shall
be located in the correct position before the set temperature of the large compartment.
Bekijk gratis de handleiding van Vevor T35K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | T35K |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 13181 MB |
