Vevor RB-25 handleiding
Handleiding
Je bekijkt pagina 22 van 224
- 21 -
Store carefully
When not in use, store cutter and accessories in dry place where they can't
be accessed by unauthorized person.
Operating Instructions
Caution: Indicates hazard that could result in minor personal injury and/or
product damage.
Care: Indicates hazard that will result in product damage.
Pre-use checks
1.Check oil level.
2.Check condition of cutter blocks and tightness of cutter block bolts.
Caution: Using loose or cracked cutter blocks may result in injury to
operators as well as damage to unit.
3.Check that the power source is appropriate for the cutter.
4.Care : If voltage is too high , the motor will burn out. If the voltage is too
low, insufficient power will be generated. Never use DC current.
5.Check that power supply is properly earthed.
6. Caution: Failure to earth power supply may result in electric shock to
operator.
7.Check that cord is undamaged and that plug is not loose.
Caution: Cut or abraded covering could result in a short and electric shock
to operator.
Warm-up
In cold weather , warm up unit for 30-60 seconds so that the hydraulic oil
reaches the proper viscosity. Pull trigger -switch to extend piston and
release when it has reached its full stroke, Repeat 15-20 times.
Stopper adjustment
The adjustable stopper function to maintain the rebar in the correct position
during cutting and must be properly set for each size of rebar before
Bekijk gratis de handleiding van Vevor RB-25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | RB-25 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22625 MB |
