Vevor RB-25 handleiding
Handleiding
Je bekijkt pagina 16 van 224
- 15 -
4.4 Control panel
1 indicating light: when connecting the power supply, the light should be
on.
2 manual switch: if the foot switch could not control the machine operation,
replace foot switch 1 by the manual switch near the power light.
3 foot switch 1: press foot switch 1 to complete the operation of angle 1
settled by the “1 point” angle adjustor.
4 foot switch 2: press foot switch 2 to complete the operation of angle 2
settled by the “2 point” angle adjustor.
5 emergency stop switch: during the operation, if there is any trouble,
release the button and stop all actions.
6. angle 1: adjust the bended angle by the “1 point” adjustor
( corresponding with foot switch 1)
7. angle 2: adjust the bended angle by the “2 point” adjustor
( corresponding with foot switch 2)
8. Before bending,please note the angle setting of “1 point” must be
bigger than the “2 point”,or the machine can’t work. This is for RB-25
AND RBC-25 , RB-32 AND RBC-32 is no problem .
4.5 Operate process
1).please connect the power wire to 110V/220V electric and see the
indicator light lights up.It means the bender is ready to work.
2).please choose the correct size fixed idler wheel and correct size idler
wheel according to the rebar diameter.
3). Please Connect pedal switches with 1 point and and 2 point holes
tightly.
4). The 1 point angle setting adjustor is for setting the foot switch
connecting with 1 point hole.For example to bend 180 degree by foot
swtich 1,you set the angle 180 degree by the 1 point adjustor,then you
touch the foot swtich 1 to bend the rebar 180 degree.
5).The 2 point angle setting adjustor is for setting the foot switch
connecting with 2 point hole.For example to bend 90 degree by foot swtich
2,you set the angle 90 degree by the 2 point adjustor,then you touch the
foot swtich 2 to bend the rebar 90 degree.
Bekijk gratis de handleiding van Vevor RB-25, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | RB-25 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22625 MB |
