Vevor PL-80M handleiding
Handleiding
Je bekijkt pagina 5 van 80
- 3 -
has insulation defects or bare copper wire, whether the connection is loose,
whether has water leakage and other unsafe factors.
● Turn off the machine before replacing the wire..
● Turn off the machine and cut off the power supply before all inspection
and maintenance..
Eyes and Body Protection:
● The operator should wear protective clothing to prevent metal melt
splash during welding, such as: leather gloves, leather apron, safety shoes,
masks or protective glasses.
● At the same time, the eyes should be protected during polishing and
hammering.
● Do not wear rings, watches, jewelry and other conductive materials,
because they have the risk of causing serious burns.
Power supply
- PL-80M; 1ph 110V or 2ph 220V 50/60Hz, 16A circuit breaker, curve D, or
16 A fuse aM type.
If the product trips the circuit breaker, please check whether using the right
fuse and circuit breaker.
This product is designed to be used in an industrial or professional
environment.In a different environment, it can be difficult to ensure
electromagnetic compatibility due to conducted disturbances as well as
radiation.
Setting
● Connect the machine to an appropriate power supply.
● Start the machine and turn on the potentiometer. The initial indication is
"0" and the standby mode is Tool 2" round meson pad.
● Different modes are selected by adjusting the potentiometer:
* Adjust triangle plate: sheet tension welding.
* Adjust wave wire: wave line welding, suitable for bending flat welding
* Adjust flattening: remove the bump by pressing.
Bekijk gratis de handleiding van Vevor PL-80M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | PL-80M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5353 MB |
