Vevor HMR1200 handleiding
Handleiding
Je bekijkt pagina 17 van 320
- 16 -
It is recommended that the trowel's kill switch be used to stop the engine
after every use. Doing this will verify that the switch is working properly and
presents no danger to the operator.
7.1 Before Starting
7.1.1 Read the safety instructions at the beginning of this manual.
7.1.2 Clean the power trowel by removing dirt and dust, particularly in the
engine cooling air inlet, carburetor, and air cleaner.
7.1.3 Check the air filter for dirt and dust. If the air filter is dirty, replace it
with a new one as required.
7.1.4 Check the carburetor for external dirt and dust. Clean it with dry
compressed air.
7.1.5 Check fastening nuts and bolts for tightness.
7.2 Engine Oil Check
7.2.1 To check the engine oil level, place the power trowel on a secure
level ground with the engine stopped.
7.2.2 Remove the filler dipstick from the engine oil filler hole (FIG. 2) and
wipe it clean.
7.2.3 Insert and remove the dipstick without screwing it into the filler neck.
Check the oil level shown on the dipstick.
7.2.4 If the oil level is low (FIG. 3), fill to the edge of the oil filler hole with
the recommended with SAE10W-30 4 stroke oil. Maximum oil capacity is
400 cc.
FIG.2 FIG.3
Bekijk gratis de handleiding van Vevor HMR1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | HMR1200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 59152 MB |
