Vevor GQ-100D handleiding
Handleiding
Je bekijkt pagina 22 van 275
- 21 -
When the tool and spring are out of the block, immediately release the clutch
handle, place the machine switch in the OFF gear, and put the machine switch in
the CW gear for normal operation.
Maintenance guideline:
Before maintaining the machine, confirm that the machine power cord plug is
removed from the socket. Always wear safety glasses and wear machine gloves
for maintenance work.
Spring maintenance:
After cleaning the pipe each time, it should be washed with clean water. After the
spring is dry, apply RIDGID spring rust-proof agent to prevent the rust treatment of
the spring, and drop the joint of the spring and the gap of the pin for lubrication.
The body clean
The machine can be cleaned with hot soapy water, but do not let the water into the
motor or other electrical components. Ensure that the machine is completely dry,
and then plug in for use.
IUBRICATING:
If the machine is used every day, it should be lubricated every week. If the use
frequency is low, lubricated once a month. If the machine is not used for a long
time, it must be lubricated by dripping oil before use. Lubrication method: use the
oil can filled with lubricating oil, grease the transmission part; grease the
lubricating oil between the joint and the joint of the bearing and clutch at least
every year (a professional maintenance master needs to remove the
maintenance). (Note: it is strictly prohibited to apply lubricating oil to the inside of
the clutch tile, otherwise the spring skid will not work normally.) (Fuel fueling parts
as shown in the figure)
Bekijk gratis de handleiding van Vevor GQ-100D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | GQ-100D |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 49458 MB |
