Vevor EM5500-48L handleiding
Handleiding
Je bekijkt pagina 41 van 352
- 39 -
Buzzer beeps
continuously and
red LED is on.
Fault code 07
Overload error. The
inverter is overload
110% and time is
up.
Reduce the connected
load by switching off some
equipment.
Fault code 05
Output short
circuited.
Check if wiring is
connected well and
remove abnormal load.
Fault code 02
Internal
temperature of
inverter component
is over 100°C.
Check whether the air flow
of the unit is blocked or
whether the ambient
temperature is too high.
Fault code 03
Battery is
over-charged.
Return to repair center.
The battery voltage
is too high.
Check if spec and quantity
of batteries are meet
requirements.
Fault code 06/22
Output abnormal
(Inverter voltage
below than 190Vac
or is higher
than 260Vac)
1. Reduce the connected
load.
2. Return to repair center
Fault code 08/09/15
Internal
components failed.
Return to repair center.
Fault code 13
Over current or
surge.
Restart the unit, if the
error happens again,
please return to repair
center.
Fault code 14
Bus voltage is too
low.
Another fault code
If the wires is connected
well, please return to
repair center.
Bekijk gratis de handleiding van Vevor EM5500-48L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | EM5500-48L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 56647 MB |
