Vevor EM5500-48L handleiding
Handleiding
Je bekijkt pagina 20 van 352
- 18 -
13
Setting voltage point
back to battery mode
when
Selecting “SBU
priority” or “Solar
first” in program
01.
Battery fully charged
(default)
48V models:
Setting range is from 48V to full
(the value of program26-0.4V),
but the max setting value must
be more than the value of
program12.
24V models:
Setting range is from 24V to full
(the value of program26-0.4V),
but the max setting value must
be more than the value of
program12.
16
Charger source
priority: To configure
charger
source priority
If this inverter/charger is working in Line, Standby or Fault
mode, charger source can be programmed as below:
Solar first
Solar energy will charge battery
as first priority.
Utility will charge battery only
when solar energy is not
available.
Solar and Utility
(default)
Solar energy and utility will
charge battery at the same time.
Only Solar
Solar energy will be the only
charger source no matter utility
is available or not.
If this inverter/charger is working in Battery mode, only solar
energy can charge battery. Solar energy will charge battery if
it's available and sufficient.
Bekijk gratis de handleiding van Vevor EM5500-48L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | EM5500-48L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 56647 MB |
