Vevor DTDB-10L-U handleiding
Handleiding
Je bekijkt pagina 15 van 192
- 14 -
Equipment cleaning and Maintenance
The distiller needs to clean the inside of its pot, condenser and other
components before or after each use , and drain all the impurities inside it.
After we have used the distilled water dispenser, we need to clean it every
once in a while. pay attention to cleaning the inner wall of its evaporation
pot, the inner wall of the condenser, the surface of the condenser tube and
the scale in the outlet pipe of the condenser. Avoid affecting its use.
For some newly purchased stills , we need to clean them first and power
them on for more than 2 hours to evaporate until the obtained distilled
water meets the requirements. Remember not to cut off the water during
use .
Note that when the distilled device is working , its surface temperature
will be very high , So be careful not to touch it to prevent being scalded.
please wait until the temperature drops to normal temperature before
cleaning.
Bekijk gratis de handleiding van Vevor DTDB-10L-U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | DTDB-10L-U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25467 MB |
