Vevor D1000 handleiding
Handleiding
Je bekijkt pagina 25 van 256
As the water flows through the pipeline, the steel cable can be recycled. The
CW/OFF/CCW should be set to the CW position, and the steel cable should not be
recycled in reverse. The automatic device should be placed in manual cable
feeding mode, and the steel cable should be recycled with both hands and placed
into the drum. The length of each recycling is about 6-12 inches. The water flow
from the flushing pipeline can also wash the steel cable and continue to recycle
the steel cable. When the dredging head is about to come out, release the foot
switch to stop the drum from rotating. Do not pull the dredging head directly out of
the pipeline while the machine is rotating, as this can cause whip injuries.
Place the switch in the OFF position, unplug the plug, pull the remaining steel
cable out of the pipeline, and place it into the drum. If necessary, replace the
dredging head and continue with other work. The pipeline needs to be unblocked
several times in a row to be fully unblocked.
Maintenance guidance
Ensure that the machine switch is placed in the off state and the plug is
plugged before the machine maintenance and adjustment. Always wear
safety glasses and use gloves for maintenance work.
Steel cable
After use, the cables should be washed with clean water to avoid corrosion of
various chemicals used to clean the pipe. Periodic application and maintenance
with rust protection agent. After the cable is dry and clean, the plate back to the
drum, you can wipe the excess rust agent with cloth.
Do not apply rust protection on rotating cables. The rotating cables will damage
your hands, and the rust repellent will spill everywhere.
Cleaning
You can clean the machine with hot soapy water, but do not let the water into the
motor or other electrical components, to make sure that the machine is completely
dry, then plug it in for practical use.
Lubricating
It is necessary to lubricate the bearings when removing and replacing the cable
drum.
Complete machine storage environment
When the machine is disabled, always store it in a dry, ventilated, no corrosive gas
environment.
Bekijk gratis de handleiding van Vevor D1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | D1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 37740 MB |
