Vevor D1000 handleiding
Handleiding
Je bekijkt pagina 18 van 256
Operation steps
Operators should wear the gloves provided randomly. Do not hold the spring with
wire gloves or other loose cloth, so that the hand may be involved and hurt.
Wear safety glasses to prevent dust and foreign objects from entering the eyes.
Wear rubber boots, rubber boots to prevent slipping and electric shocks, especially
in wet conditions.
If the pipe contains chemicals, please wear the appropriate protective equipment,
such as a mask, respirator, etc. Additional chemical protection equipment also
includes liquid isolation gloves and more.
Follow the operating procedures of this manual to reduce injuries caused by spring
twisting, breakage, whipping, machine dumping, chemical burns, or other causes.
1. Ensure that the work area and machine are set up correctly and no irrelevant
personnel are in the work area.
2. Pull the cable out of the drum, get into the pipe, and go as far as you can.
Ensure at least 1 foot of wire wire in the pipe
In, this can avoid the cable out of the pipe and cause whipping damage.
3. Correct operation posture:
Be able to operate the foot switch, and can leave quickly, do not completely
step on it.
Make sure that you can keep a good physical balance.
At least one hand can manipulate the cable, which can feel the movement of
the cable.
The CW / OFF / CCW switch can be controlled.
See Figure Figure for the correct operating posture example.
Bekijk gratis de handleiding van Vevor D1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | D1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 37740 MB |
