Vevor 90E handleiding
Handleiding
Je bekijkt pagina 13 van 160
- 12 -
3. Place the wire
on the sheet metal
section that needs
to be repaired, as
close to welding
area as possible.
For the negative connection, the code can be selected as 1 and the power
can be selected as 6. The power can be increased, granting a higher number
of welds to dissolve the plating on the negative tip.
3.Method of operation
a.Gasket welding
The negative line fixed to
the polished clean and
remove the paint on the
workpiece, the closer the
operating surface the
better .
Connect the gasket
connector to the torch and
lock it with a gasket.
Select the appropriate
welding mode.
1. Fixed ground
2. the welding torch
in the vicinity of the
machine near the
automatic welding
machine.
Bekijk gratis de handleiding van Vevor 90E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 90E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17767 MB |
