Vevor 28104-1 handleiding
Handleiding
Je bekijkt pagina 28 van 288
- 26 -
Step 5 - Reposition the scrap board
(C) so that it is flush against
the offset guide and the
back edge of the vertical
board.
Step 6 -
Align the “half-blind” temp-
plate line (A) Fig. R5 with
the line formed where the
scrap board (B) and the
vertical board (C) meet.
Step 4 -
Make a spacer equal to the rabbet’s width. Put the spacer
(A) Fig. R4 against the left edge of the tail board, move the left offset
guide (B) flush against the spacer, and secure the offset guide.
Step 7 -
Mount the dovetail bit and template guide to the router and
set the router bit depth using the “half-blind” bit depth guide (Fig. R6).
Step 8 - Make a climb-cut from right to left across the outer edge of
the tail board to reduce tear-out (Fig. R7).
Step 9 - Rout in and out of the fingers of the template from left to right
(Fig. R8). Remove the boards.
Bekijk gratis de handleiding van Vevor 28104-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 28104-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 74655 MB |
