Vevor 28104-1 handleiding
Handleiding
Je bekijkt pagina 20 van 288
- 18 -
DRAWERS
Tips for making drawers:
Tails (A) Fig. O1 are cut into the sides of the drawers, while pins (B) Fig.
O1 are cut into the fronts and backs of drawers.
You can use either solid wood or plywood for the drawer bottoms (A)
Fig. O2. Insert the bottoms in a groove along the bottom of the
fronts and sides. Allow the drawer bottom to be free-floating (without
glue) to allow for seasonal expansion and contraction.
The grooves can go all the way to the ends of the boards if the joints
are half-blind dovetails. To accomplish this, position the groove so
that it runs through one of the tails on the side (Fig. O2). You will
have to stop the grooves on through dovetails or box joints before
they reach the end of the board to prevent them from being seen (Figs.
O5 and O6).
Bekijk gratis de handleiding van Vevor 28104-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 28104-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 74655 MB |
