Vevor 28104-1 handleiding
Handleiding
Je bekijkt pagina 15 van 288
- 13 -
Step 7 -Remove the 2 positioning bolts
NOTE: The template has been removed for clarity.
After tightening the 4 Cross bolts on the template，must remove
the 2 positioning bolts.
HALF-PINS VS. HALF-TAILS
Traditionally, dovetails have half-pins cut on both ends (Fig. G1). Half-
tails will be just as strong, but will not be as attractive (Fig. G2). If your
joints are half-tails and you want half-pins, move the vertical board 1/2"
either left or right, then move the horizontal board accordingly. The
procedure is the same with the 28104-1 Miniature template, except
that you move the boards 1/4".
G1
G2
Bekijk gratis de handleiding van Vevor 28104-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 28104-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 74655 MB |
