Vevor 28014BX handleiding
Handleiding
Je bekijkt pagina 5 van 77
- 4 -
Required:
* Screwdriver
* To install your solar heating system you will require 2 hoses - one
that will reach from the pool equipment to the collector and one that
reaches from the collector back to the pool.
INSTALLATION
1. Provide an area that is free of any sharp objects with at least 6 hours of
full sunlight a day.
2. Allow the collectors to relax in the sun (30 minutes to an hour). DO NOT
LAY COLLECTORS ON THE GRASS IT CAN DAMAGE THE LAWN
UNDERNEATH! DO NOT WALK ON COLLECTORS.
3. Join the header pipes together using one black rubber connector hose
and two 2" hose clamps. Position 2"hose clamp in from each end of rubber
connector hose and tighten (as shown). Do Not Over tighten. Do not push
connector hose against tubes of collector.
4. Cover the rubber end caps on the ends of the header pipe with a 2"hose
Bekijk gratis de handleiding van Vevor 28014BX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 28014BX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9098 MB |
