Vevor 10190010146 handleiding
Handleiding
Je bekijkt pagina 5 van 64
- 4 -
2. Recommended cutting speed for high speed steel annular cutter:
Dia
Material
12-18
19-25
26-32
33-39
40-46
47-53
54-60
61-65
carbon steel
447-318
301-229
220-179
173-146
143-124
121-108
106-95
93-88
alloy steel
371-247
234-178
171-139
135-114
111-96
94-84
82-74
73-68
stainless steel
345-230
217-165
159-129
125-106
103-90
88-78
76-69
67-63
Aluminum
1857-1238
1173-891
857-696
675-571
557-484
474-420
412-371
365-342
cast iron
796-530
502-382
367-298
289-244
238-207
203-180
176-159
156-146
cast copper
1194-796
754-573
551-447
434-367
358-311
304-270
265-238
234-220
3. Feed speed: The recommended feed speed is 0.08-0.12mm/R or
0.6-1.0mm/sec.Different feed speed will cause different chip and affect the
performance of removal of chips.
4. Positioning: Chisel a positioning point in the center of the position to be
drilled or mark a "cross" line with an alloy needle to ensure the accuracy of
the drilled position. Note that when using the center chisel to hit the
positioning point, please make sure that the center chisel is perpendicular
to the surface of the workpiece to avoid affecting the smooth discharge of
the cutting core
5. Start to drill: Make sure the button of magnetic drill machine is clean
before power on. Turn on the switch of coolant liquid when start to drill.
First feed slowly and feed in the normal speed after drill 1-2mm.
6. Finish drill: Turn off the power and use hook to remove the chips on the
cutter after it stops.
[Notice]
The following actions will help to reduce or slow wearing and fracturing of
cutter.
1. When drilling steel parts, please make sure enough amount of cooling
and use metal cutting fluid.
2. Good rigidity of drill pipe and the guide rail gap can improve the
precision of drilling and the life of the bit.
3. Please make sure flat and clean between the magnetic holder and
artifacts.
4. Before cutting, make sure all parts to be locked surely.
Bekijk gratis de handleiding van Vevor 10190010146, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 10190010146 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7010 MB |
