Vestil WP-3648 handleiding

17 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 17
Table of Contents Rev. 4/12/2024 WP, MANUAL
Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 10 of 17
Step 2: Fasten the nylon safety strap to the fork carriage without slack.
The nylon strap is an essential safety
feature. If the forks are accidentally tilted towards the ground,
the strap will not prevent the platform from sliding off of the
fork lift if it is improperly connected to the platform or the fork
lift. Connect the strap to the carriage of your fork truck. Wrap
the strap around the carriage without slack at one of the
points indicated by dotted arrows in Fig. 6 (vertical midpoint of
carriage). If slack is left in the strap, the platform will be able
to slide. This condition must be avoided.
The unit is delivered with the safety strap connected to the
midrail. Each time the platform is mounted on a fork lift the
hook end of the nylon strap must be connected to the fork
carriage.
WP-series platforms: The capacity of each platform
appears on Sign 080 which is fastened to the mast guard. See
LABELING DIAGRAM on p. 12 or 15. Only use the platform to
lift one or two people along with necessary light tools and
equipment. Maximum occupancy is two persons at a time.
The capacity of SP-series platforms is 1,000 pounds
(455kg). These platforms are designed to lift only one person
as well as a loaded skid placed on top of the fork tubes. This
arrangement allows the platform occupant to remove items
from the skid and place them on shelves, racks, etc. while
remaining inside the protective guardrail. The weight of the
skid supported by the fork tubes must not produce a horizontal
load center more than 20 inches (~51cm) from the front of the
stock platform. Contact TECHNICAL SERVICE with questions.
USING THE PLATFORM
The platform user, fork truck operator, and/or bystanders might be seriously injured or killed if this
product is used improperly.
WP-series and SP-series products are medium-duty platforms. ONLY use with sit-down, rider, high-lift fork trucks
having a minimum load capacity of 3,000 pounds at 24” load center. Never exceed the forklift capacity.
Review the SAFETY INSTRUCTIONS on p. 5 - 6 before each use.
The forklift used to lift this platform must comply with Occupational Safety and Health Administration (OSHA)
standard 1910.178 Powered industrial trucks” and US national standard ANSI/ITSDF B56.1. See 29 CFR 1910.178.
Acquire a copy of the latest version of ANSI/ITSDF B56.1, “Safety Standard for Low Lift and High Lift Trucks. The
standard is freely downloadable from the ITSDF website (www.ITSDF.org).
Every occupant must wear a safety
harness and lanyard properly fit for his/her
weight and height.
SP platforms: The platform occupant
MUST attach a lanyard to an anchor
point (B).
WP platforms: Maximum occupancy is 2
persons; only 1 person per anchoring
point (A or B).
Do not lean against the handrails or safety
chains.
Only use the work platform on smooth,
level, finished surfaces capable of
supporting the combined weight of the
person(s) occupying the platform and all
equipment and/or material present on the
platform, the platform, and the fork lift.
Avoid sudden stops and quick turns while transporting the platform.
Mast
Carriage
Fork
(tine)
Anchor
point B
Safety/carriage strap
attachment point. DO
NOT attach harness
here.
Safety
placard
Proper loading (SP-series)
Fork tubes:
apply 1 skid
at a time.
Combined weight of skid
and load must not
produce load center more
than 20 inches from front
of work platform. (Front of
platform indicated by solid
line; 20in. in front of
platform indicated with
dashed line.)
FIG. 6: Proper attachment of nylon safety strap
Anchor
point A

Bekijk gratis de handleiding van Vestil WP-3648, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkVestil
ModelWP-3648
CategorieNiet gecategoriseerd
TaalNederlands
Grootte8273 MB