Vestil TRI-AF handleiding
Handleiding
Je bekijkt pagina 8 van 10
0813 Rev. 12/6/2017 TRI, MANUAL
Copyright 2017 Vestil Manufacturing Co. Page 8 of 10
2. Refer to the diagram on p. 7 to install the eyebolt.
Feed the bolt up through the hole in the center of the
top casting. Put the beveled washer over the end of
the bolt with the larger side facing up, and secure
the bolt in place with hex nuts.
3. Feed quick links through the leg islets and fasten the chains to the quick links.
4. If your tripod has adjustable legs (models TRI-SA & TRI-AA), pin the inner leg tubes to the outer
leg tubes. Notice that the inner leg tubes have a series of pin holes along the length of the tube.
The lower end of each inner leg tube has 2 additional holes for pins that connect to the feet.
5. Attach the foot castings to the lower end of the leg tubes with clevis pins and hitch pins.
6. Each foot can pivot 90° to allow you to select
either a spiked bottom or a smooth bottom. Use
spikes when the tripod is used on loose or grassy
ground. The smooth face is suited for improved
surfaces like concrete and asphalt. Select the
appropriate foot orientation before using the
tripod.
Pin inner & outer leg tubes together
Hitch pin
(45286)
Clevis pin
(
23
-
112
-
024
)
Inner leg
tube
Outer leg tube
Attach foot castings
Complete Assembly
Quick link
Leg islet
Eyebolt
Chain
Clevis pin
(
23
-
112
-
024
)
Hitch pin
(
45286)
Bekijk gratis de handleiding van Vestil TRI-AF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | TRI-AF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1864 MB |
