Vestil STAND-G-V handleiding
Handleiding
Je bekijkt pagina 8 van 9
Table of Contents 8/11/2023 STAND-G, MANUAL
Table of Contents Vestil Manufacturing Co. 2023 Page 8 of 9
MAINTENANCE
Implement a maintenance program to ensure that the product functions properly and safely
for as long as possible. The end-user is responsible for selecting and training employees to work
on the material stand. “Work on” means use, inspect, and maintain the product. ONLY
trained, authorized personnel should perform inspection, maintenance, or repair work.
Step 1: Tag the stand, “Out of Service.”
Step 2: Remove any dirt or other matter from all surfaces.
Step 3: Conduct a monthly inspection as described in INSPECTIONS on p. 7. If deformity,
corrosion, rusting, or excessive wear is found, DO NOT use the product. Permanently remove it
from service. If any other deviations from SATISFACTORY CONDITION are discovered during an
inspection, proceed to step 4.
Step 4: Perform all necessary adjustments, replacements, and/or repairs but DO NOT modify
the stand.
NOTE: An “adjustment” is a simple correction that restores the device to satisfactory
condition, such as tightening loose fasteners, or removing dirt or other debris from the
surface. “Replacement” means the removal of worn parts and installation of manufacturer-
approved replacement parts. A “repair” is an operation that restores a part to satisfactory
condition. A “modification” is a change that alters the stand from its original condition such
as bending a structural member or removing a part or several parts. NEVER modify the
device without first obtaining express, written approval from Vestil. Modifications
automatically void the limited warranty (see p. 9) and might make the stand unsafe to use.
Step 5: Make a dated record of all repairs, adjustments and replacements performed.
LABELING DIAGRAM
The unit should be labeled as shown in the diagram. Label content and location are
subject to change so your product might not be labeled exactly as shown. Compare this
diagram to your RECORD OF SATISFACTORY CONDITION. Replace all labels that are
damaged, missing, or not easily readable (e.g. faded). Order replacement labels by
contacting the TECHNICAL SERVICE & PARTS DEPARTMENT online at
https://www.vestil.com/page-parts-request.php. Alternatively, you may request replacement
parts and/or service by calling (260) 665-7586 and asking the operator to connect you to the
PARTS DEPARTMENT.
A: Label 1153 or equivalent
manufacturer-applied label (Model,
serial no., weight, capacity)
A
Bekijk gratis de handleiding van Vestil STAND-G-V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | STAND-G-V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4926 MB |
