Vestil PRCT-HD-30-AB handleiding
Handleiding
Je bekijkt pagina 5 van 7
Table of Contents Rev. 4/2/2021 PRCT-HD MANUAL
Table of Contents Copyright 2017 Vestil Manufacturing Co. Page 5 of 7
ASSEMBLING THE CART
Numbers in parentheses correspond to part numbers in the bills of materials on p. 3, 4.
STEP 1: Attach casters to the underside of the deck subassembly. There are 2 types of caster included in
the hardware kit: 1) Rigid casters (16-132-022); and 2) Swiveling casters with brakes (16-132-053). The
applicable exploded view indicates where each caster must be installed. Place the mounting plate of
each caster inside a bulldog caster receiver (16-132-076). Secure the casters in place with either a
carriage bolt (21373) and lock nut (37024) or a clevis pin (99-112-006) and cotter pin (65076).
STEP 2: [PRCT-HD-30-AB and PRCT-HD-44-AB] Install rails on both sides of the deck next to the side plates.
Fasten each rail to the deck using 6 bolts (13105), 12 flat washers (33008), and 6 lock nuts (37024). Slide a
flat washer onto each bolt. Feed the bolt through a bolt hole in a mounting bracket. Secure the
connection with another flat washer and a lock nut. Attach the remaining rail(s) where necessary for your
application. Rail position must allow all loads applied to the cart to be evenly distributed over the surface
of the deck.
Swiveling caster
with brake
Rigid caster
Brake
lever
Carriage
bolt
Lock nut
Cotter
pin
Clevis
pin
Mounting
plate of
caster
Bulldog caster receiver
1
Mounting
bracket
Rail
Side plate
1
2
Bolt
Flat
washer
2
Bolt
Flat
washer
Lock nut
Bekijk gratis de handleiding van Vestil PRCT-HD-30-AB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | PRCT-HD-30-AB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1899 MB |
