Vestil PM10-2245 handleiding
Handleiding
Je bekijkt pagina 3 van 14
PM10, Manual.doc
Copyright 2015 Vestil Manufacturing Corp.
Page 3 of 14
SAFETY GUIDELINES
Failure to read and understand the instructions included in this manual before using or servicing the
pallet truck constitutes misuse of the product. Study the entire manual before you use the truck for the
first time and before each subsequent use. Read the manual to refresh your understanding of the safe use and
maintenance procedures on p. 50-51. If questions remain after you finish reading the manual, contact Vestil for
answers. DO NOT attempt to resolve any problem with the truck unless you are certain
that it will be safe to use
afterwards.
To decrease the risk of electrocution:
DO NOT contact or operate the pallet truck close to electrified wires or other sources of electricity;
Before operating the PM, always inspect the area where you will use it.
Improper use might result in serious personal injuries to the operator and/or bystanders. To
minimize the possibility of injury, ALL persons who might operate, perform maintenance on, or service the PM
must read, understand and apply the following instructions:
DO NOT operate the PM unless and until you are:
1. Trained to use the machine; AND
2. Certified as a trained operator by your employer in accordance with U.S. OSHA regulations (29 CFR
§1910.178) and any standards incorporated by reference (e.g. ANSI/ITSDF B56.1-2005).
DO NOT attempt to lift or transport loads that exceed the rated capacity.
Inspect the machine before each use; DO NOT use the PM unless it is in normal condition. Normal operating
condition exists if the PM passes the inspection and functions tests described under the heading, “Inspect the
PM & Perform a Functions Tests” .
DO NOT use the unit until you read and understand the entire owner’s manual. Review the manual before
each use AND before performing maintenance on the device.
DO NOT use the PM if the load-supporting elements sustain any structural damage. Structural elements
include, but are not limited to, the forks, carriage, and wheels. If structural damage is present, immediately
tag the unit “Out of Service” and inform maintenance personnel of the problem.
DO NOT use the PM if it makes unusual noises during operation.
DO NOT attempt to lift an unevenly distributed load. Always center and evenly distribute the load on the forks.
DO NOT operate the PM on surfaces (ramps or grades) angled more than 4 degrees.
DO NOT leave the PM unattended while it supports a load. Always fully lower the forks, and then completely
disengage the skid or pallet.
DO NOT modify the pallet truck without first receiving written authorization from Vestil. Unauthorized
modifications may make the PM unsafe to use.
To maximize the service life of the PM and to prevent damage:
Always store the machine in a secure, dry location where it will not interfere with traffic or other activities.
Bekijk gratis de handleiding van Vestil PM10-2245, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | PM10-2245 |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 1522 MB |
