Vestil PJ-LIFT handleiding
Handleiding
Je bekijkt pagina 5 van 8
TABLE OF CONTENTS Rev. 5/7/2021 PJ-LIFT, MANUAL
TABLE OF CONTENTS Copyright 2017 Vestil Manufacturing Corp. Page 5 of 8
INSTALLING/MOUNTING THE HOIST
Only install the hoist on a low lift pallet truck in good condition. The truck must be able to easily support
the combined weight of the hoist, load rigging, and a full capacity load. See SPECIFICATIONS
on p. 2.
Step 1: Drive the pallet truck into the fork pockets of the hoist as shown (or lift the hoist and set it on
the forks).
Step 2: Attach braces to the fork tubes with
3
/
8
”-16 x 3” bolts and
3
/
8
”-16 hex nuts. Braces go under the
forks of the pallet truck. Tighten the nuts until braces press firmly against the forks. [NOTE: Pallet truck
not shown in diagrams to show the connections more clearly.]
Brace
3
/
8
”-16 x 3” hex bolt
3
/
8
”-16 hex nut
Brace
Bekijk gratis de handleiding van Vestil PJ-LIFT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | PJ-LIFT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1647 MB |
