Vestil IBC-TLT handleiding
Handleiding
Je bekijkt pagina 5 van 7
Table of Contents Rev. 4/16/2021 IBC-TLT, MANUAL
Table of Contents Copyright 2021 Vestil Manufacturing Corp. Page 5 of 7
RECORD OF SATISFACTORY CONDITION (THE “RECORD”)
Before putting the cart into service, make a detailed record of its condition. Include
observations about all features: pivot points, welds, the container support subassembly,
casters, brakes, the handle, pins and other hardware. Thoroughly photograph the unit from
multiple angles. All features should be clearly visible. Photograph all labels applied to the cart.
Describe where each label is located. Collect all photographs and writings in a single file. This
file is a record of the cart in satisfactory condition. Compare the results of each inspection to
this RECORD to determine whether the unit is in satisfactory condition. Do not use the cart
unless it is in satisfactory condition
INSPECTIONS AND MAINTENANCE
Compare inspection results to the RECORD. Do not continue to use the product unless
every component is in SATISFACTORY CONDITION. Cosmetic changes, like damaged
paint/powder coat do not constitute changes from satisfactory condition. However, touchup
paint should be applied to all affected areas as soon as damage occurs. Contact
TECHNICAL SERVICE to order replacement parts. Contact information is provided on the
cover page of this manual.
Inspect the following at least once per month:
1. Surfaces – Check all surfaces of the product for dirt or other matter, especially fluids. Clean
the surfaces of the stand.
2. Hardware, fasteners – Examine hardware & fasteners (clevis pins, cotter pins, bolts, nuts,
etc.). Replace damaged/worn hardware.
3. Handle – Examine the handle for bends, punctures, corrosion/rusting especially on legs
where they contact the handle brackets).
4. Lower frame and Container support – Examine the lower frame for wear, breaks,
corrosion/rust, metal fatigue, and other forms of damage (e.g. impact damage).
5. Casters – Inspect all 4 casters and the bulldog caster receivers. Replace a caster if its wheel
is significantly worn, e.g. does not roll smoothly. Lubricate wheel pivot points as necessary
to allow for quiet, uniform rotation. Inspect each caster fork, bearing, axle, wheel hub,
mounting plate, and brake lever (swiveling casters only) for damage.
6. Spring – Check the spring for cracks and other damage. Make sure that no debris is caught
in the spring.
7. Labels – Replace labels that are missing, damaged, or not easily readable from a
reasonable distance.
8. Overall structure – Examine the whole structure for rusting or metal erosion, rot, thinned
regions. In particular, examine pivot points, handle brackets, . If rusting is purely superficial,
remove the rust/corrosion. Clean the affected area and apply touchup paint. If rusting, rot,
or thinning has weakened the material, contact TECHNICAL SERVICE for advice.
Bekijk gratis de handleiding van Vestil IBC-TLT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | IBC-TLT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2065 MB |
