Vestil EPFC-25-AA handleiding
Handleiding
Je bekijkt pagina 5 van 7
8/1/2016 EPFC-25-AA.docx
Copyright 2016 Vestil Manufacturing Corp. Page 5 of 7
Battery and Battery Charger Operation
The batteries and the battery charger are located inside the housing. To charge the batteries:
1. Press the red on/off switch to turn off the power supply.
2. Before connecting the battery charger to the local power supply, check and insure that the voltages of both are
the same.
3. Plug the AC extension cord from the charger into a wall outlet to turn on the charger. The charger automatically
controls the charging process and matches the current requirements of the batteries. When the batteries are fully
charged, the charger will continue to supply only enough current to maintain full charge levels.
4. When charging is finished, disconnect the AC plug from the wall outlet.
Maintenance
Before working on the unit, turn off power, lower the boom, and confirm that the brakes are engaged working properly.
Chock the wheels to secure the truck. Disconnect batteries before working on the electrical system.
1. Check electrical wiring for frays, etc. Inspect the batteries for leaks and accumulated corrosion.
2. Battery electrolyte level should be checked before charging the battery. The level should be maintained at 1/2 inch
above the plates. Do not overfill. Charge the battery at the end of each day's usage.
The battery should be charged at least once per week when not in use.
3. Before checking the hydraulic fluid level, park the truck on a level surface and fully lower the boom.
Remove the filler cap and check the level of the fluid. Check the hydraulic hoses for significant wear, kinks, cuts, etc.
Replace damaged hoses. Change the oil at least once a year. The oil should be changed as soon as it darkens,
becomes gritty, or appears milky. Milky appearance indicates the presence of water. Replace the oil with AW-32
hydraulic fluid or its equivalent.
Trouble Shooting
If a malfunction occurs while performing any of the following tests, do not use it until the truck is restored to
normal operating condition. The table below identifies several common issues and provides lists of possible
causes. To resolve other issues, contact technical support at Vestil.
1. Verify the battery cable connections are tight on the batteries.
2. Verify there is no leakage of oil from previous use.
3. Pull the red button, item 2.3, up and check the battery charge indicator.
4. Test boom functions: rise, lower, extend and retract.
5. Test drive functions (forward and reverse).
Bekijk gratis de handleiding van Vestil EPFC-25-AA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | EPFC-25-AA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1389 MB |
