Vestil CYL-EH-FF handleiding
Handleiding
Je bekijkt pagina 8 van 9
rev. 4/2/2014 CYL-EH, manual.doc
Copyright 2014 Vestil Manufacturing Corp. 8 of 9
Inspections and Maintenance:
DO NOT use the wrapping machine until all problems discovered during an inspection
have been resolved.
Inspect the dolly periodically (at least once per month) to confirm normal condition. If the inspection
reveals problems, do not use the dolly until it is restored to normal condition.
Examine the dolly for cracked welds, metal fatigue, rust, and corrosion that affects the structural
integrity of the dolly. The structure should be clean, square and rigid, and free of rust and corrosion.
Remove dirt and debris.
Inspect the fork pockets. Each pocket should be square, rigid and structurally sound.
Check the ratchets and ratchet straps. Confirm normal operation and condition. Replace damaged
straps and ratchets.
Inspect the lifting eye. Confirm that the opening is not elongated, widened, etc. The metal surrounding
the eye should not be cracked, warped, etc.
Labels: confirm that all labels (shown in “Label placement diagram” on p. 18) are present,
undamaged and readable.
A (Label 203)
D (Label 287)
B
D
(
back side of cross bar
)
A
B (Label 728)
C (back side of cross bar)
Label Placement Diagram
Welding carts should be labeled as shown below.
C (Label 658)
Bekijk gratis de handleiding van Vestil CYL-EH-FF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CYL-EH-FF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1878 MB |
