Vestil CYL-EH-FF handleiding
Handleiding
Je bekijkt pagina 7 van 9

rev. 4/2/2014 CYL-EH, manual.doc
Copyright 2014 Vestil Manufacturing Corp. 7 of 9
Use Instructions:
1. Place a cylinder on the cart. It should rest firmly against the crossbars.
2. Release the ratchet to extend the strap. To release the ratchet, pull the release lever toward the handle and
pivot the ratchet handle as far from the ratchet base is it will travel (approximately 180 degrees). By pulling on
the strap now, it will unwind from the spindle and increase the usable length. Ratchet parts are identified in Fig.
3B below.
3. Wrap the ratchet straps around the cylinder and connect the hooks to the hook slots of the divider.
4. Pivot the handle back (towards the base) and let go of the release lever.
5. Tighten the strap against the cylinder by moving the handle towards back-and-forth.
6. To remove a cylinder from the cart, release strap tension by following the procedure described in step 2
(above).
Fig. 3B: Wrap the ratchet straps around each
cylinder and slide the hooks into the hook slots on
the back of the divider.
Hook
slot
Hook
slot
Hook
Divider
Lifting eye
Ratchet
handle
Ratchet
base
Ratchet
release
FIG. 3A: Cylinder dolly
Ratchet
strap
Cross
bar
Cross bar
Spindle
Bekijk gratis de handleiding van Vestil CYL-EH-FF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Vestil |
Model | CYL-EH-FF |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 1878 MB |