Vestil CYL-2-FF handleiding
Handleiding
Je bekijkt pagina 7 van 8
rev. 1/30/2017 CYL-2, MANUAL.doc
Copyright 2017 Vestil Manufacturing Corp. 7 of 8
Maintenance:
When the dolly is delivered, make a written record of its appearance. Include observations about
welds, the rigidity of the frame, and appearances of the wheels and straps. This record establishes
“normal condition”. During future inspections, compare observations to the written record to determine if
the unit is in normal condition.
Inspect the dolly periodically (at least once per month) to confirm normal condition. If the inspection
reveals problems, do not use the dolly until it is restored to normal condition.
Examine the dolly for cracked welds, metal fatigue, rust, and corrosion that affects the structural
integrity of the dolly. The structure should be clean, square and rigid, and free of rust and corrosion.
Remove dirt and debris.
Inspect the fork pockets. Each pocket should be square, rigid and structurally sound.
Check the ratchets and ratchet straps. Confirm normal operation and condition. Replace damaged
straps and ratchets.
Inspect the lifting eye. Confirm that the opening is not elongated, widened, etc. The metal surrounding
the eye should not be cracked, warped, etc.
Labels: confirm that all labels (shown in “Labeling diagram” below) are present, undamaged and
readable.
C (Label 287)
A
B &
C
(
t
op of toolbox
)
A (Label 728)
Labeling Diagram:
Welding carts should always be labeled as shown below.
B (Label 658)
Bekijk gratis de handleiding van Vestil CYL-2-FF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CYL-2-FF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1990 MB |
