Vestil CYL-2-FF-G handleiding
Handleiding
Je bekijkt pagina 6 van 9
Table of Contents Rev. 7/24/2024 CYL-2, MANUAL
Table of Contents Copyright 2024 Vestil Manufacturing 6 of 9
USING THE CYLINDER CART
USING THIS (FORKLIFT TRUCK) FRONT END ATTACHMENT AFFECTS THE CENTER OF GRAVITY OF YOUR
LIFT TRUCK.BEFORE USING THIS DEVICE, US FEDERAL REGULATION 29 CFR 1910.178 REQUIRES YOU TO
CONTACT THE MANUFACTURER OF YOUR LIFT TRUCK TO REQUEST:
o WRITTEN APPROVAL (29 CFR 1910.178(a)(4) TO USE THE ATTACHMENT WITH THE TRUCK; AND
o MARKINGS FOR THE LIFT TRUCK THAT IDENTIFY THE ATTACHMENT AND GIVE THE APPROXIMATE
WEIGHT OF THE TRUCK AND ATTACHMENT AT MAXIMUM ELEVATION WITH A LATERALLY-CENTERED
LOAD (29 CFR 1910.178(a)(5). DO NOT USE THIS DEVICE TO TRANSPORT CYLINDERS WHILE MOUNTED
ON A LIFT TRUCK UNTIL YOUR TRUCK IS MARKED WITH CORRECTED CAPACITY TAGS. ONLY USE THIS
DEVICE WITH LIFT TRUCKS THAY HAVE BEEN MARKED WITH CORRECTED CAPACITY TAGS.
TRANSPORTING THE CART
Step 1: To move the cylinder cart manually, simply grasp the handles and push the cart to the
destination. If is it necessary to transport the cart by forklift, or to lift it with a hoist, follow the
applicable instruction.
i. Hoist: Attach the hoist hook to the shackle. Do not side load the hoist! Side loading the hoist will
result in load swing as the cart lifts off of the ground.
Bekijk gratis de handleiding van Vestil CYL-2-FF-G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CYL-2-FF-G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2157 MB |
