Vestil CYHT-1 CYHT-2 handleiding
Handleiding
Je bekijkt pagina 4 van 5
Rev. 4/20/2021 CYHT-1, CYHT-2, MANUAL
Copyright 2021 Vestil Manufacturing Corp. Page 4 of 5
RECORD OF SATISFACTORY CONDITION (THE “RECORD”)
After the unit is assembled, make a detailed record of its condition. Include observations about all
features: welds, frame elements, fasteners (axle pin, washers, cotter pins, etc.) and wheels. Thoroughly
photograph the unit from multiple angles so that all features are recorded. Photograph all labels applied
to the product. Describe the location of each label. Collect all photographs and writings in a single file.
This file is a record of the cart in satisfactory condition. Compare the results of each inspection to this
RECORD to determine whether the cart is in satisfactory condition. Do not use the cart unless it is in
satisfactory condition
INSPECTIONS AND MAINTENANCE
Compare inspection results to the RECORD. Do not continue to use the cart unless every
component is in SATISFACTORY CONDITION. Cosmetic changes, like damaged paint/powder coat
do not constitute changes from satisfactory condition. However, touchup paint should be applied to all
affected areas as soon as damage occurs. Contact
TECHNICAL SERVICE to order replacement
parts. Contact information is provided on the cover page of this manual. DON’T GUESS! If you are
unsure whether your cart should be used, contact
TECHNICAL SERVICE.
Inspect the following at least once per month:
1. Surfaces – Check all surfaces of the product for dirt or other matter, especially fluids. Clean the
surfaces of the stand.
2. Hardware, fasteners – Examine hardware & fasteners (axle pin, washers, cotter pins). Replace
damaged/worn hardware.
3. Wheels – Check each wheel and wheel hub for damage such as cracks, significant or uneven wear.
4. Frame – Examine the frame for wear, breaks, corrosion/rusting, metal fatigue, and other forms of
damage, e.g. impact damage.
5. Labels – Replace labels that are damaged or not easily readable from a reasonable distance.
6. Overall structure – Examine the whole structure for rusting or metal erosion, rot, thinned regions. In
particular, examine the axle pin channel, and ground-contacting elements. If rusting is purely
superficial, remove the rust/corrosion. Clean the affected area and apply touchup paint. If rusting,
rot, or thinning has weakened the material, contact TECHNICAL SERVICE
for advice.
LABELING DIAGRAM
Label content and locations are subject to change so your product might not be labeled exactly as
shown. Compare this diagram to the RECORD. If differences exist between the diagram and the
RECORD, contact TECHNICAL SERVICE
. Replace all labels that are damaged, missing, or not easily
readable (e.g. faded). To order replacement labels, contact the technical service and parts department
online at
http://www.vestilmfg.com/parts_info.htm. Alternatively, you may request replacement parts
and/or service by calling (260) 665-7586 and asking the operator to connect you to the Parts
Department.
Label 1153, facing operator
Label 658, facing operator
Bekijk gratis de handleiding van Vestil CYHT-1 CYHT-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CYHT-1 CYHT-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1114 MB |
