Vestil CR-48-2 handleiding
Handleiding
Je bekijkt pagina 7 van 10
Table of Contents Rev. 4/25/2025 CR, MANUAL
Table of Contents Copyright 2025 Vestil Manufacturing Page 7 of 10
NATIONAL STANDARDS
According to US Federal Occupational Safety and Health Administration (OSHA) Rule
1910.178 (29 CFR 1910.178; the “Rule”), this device is a front end attachment for a lift truck
whenever it is mounted on the carriage of a lift truck. The Rule incorporates American National
Standard ANSI/ITSDF B56.1 (the “Standard”) published by the Industrial Truck Standards
Development Foundation (ITSDF) on its website (www.itsdf.org). The standard is freely
downloadable at http://www.itsdf.org/cue/b56-standards.html. Before putting this carpet
pole into service, you must acquire a copy of the Standard. Apply all relevant parts of Part II:
For the User. Lift truck users must mark/label the truck to identify the carpet pole, show the
weight of the truck and pole combination, and show the capacity of the truck with the pole at
maximum elevation with the load laterally centered. If instructions in this manual conflict with
instructions in the Standard then the instructions in the Standard should be applied. Please
contact our TECHNICAL SERVICE department if you believe that these instructions conflict with
the Standard. Contact information for TECHNICAL SERVICE appears on the cover page of this
manual.
USING THE CARPET POLE
Step 1: Insert the pole into the core of a roll of carpet. Drive forward until the end of the roll
contacts the receiver. The yellow end of the pole must extend beyond the end of the roll. Do
not use the carpet pole to lift and/or move a carpet roll unless the pole is long enough to
extend beyond the end of the carpet roll.
Step 2: Raise the forks only as high as necessary to lift the roll of carpet off of the ground and to
avoid contact with objects during transport. Always watch and listen to the pole for
abnormalities during use. DO NOT leave a raised roll unattended. Always unload the carpet
pole before leaving the forklift.
RECORD OF SATISFACTORY CONDITION
Before using the carpet pole for the first time, make a written record of its appearance.
Describe the condition of the frame, pole, carriage brackets, and the latch. Take photographs
and/or videos of all features. Make sure that all features are clearly captured in your
photos/videos. Similarly record all labels applied to the carpet pole in such a way that the
labels can be clearly seen as can their locations. Collect all photos, videos, and writings in a file.
The file is a record of the unit in satisfactory condition. When conducting any inspection,
compare your observations to the record to determine if the unit is in satisfactory condition. Do
not use the carpet pole unless every component is in satisfactory condition. Cosmetic changes,
like damaged paint/powder coat or superficial rust, do not constitute changes from satisfactory
condition. However, touchup paint should be applied to all affected areas that previously were
painted/powder coated as soon as damage occurs.
INSPECTING THE CARPET POLE
Inspections and repairs should only be performed by qualified persons. Compare the results
of each inspection to the RECORD OF SATISFACTORY CONDITION (the “RECORD”). Do not use
the carpet pole unless all parts are in satisfactory condition. Replace parts that are not in
satisfactory condition before returning the pole to service. DON’T GUESS! If you have any
questions about the condition of your carpet pole, contact the TECHNICAL SERVICE department.
The phone number is provided on the cover page of this manual. Never make temporary
repairs of damaged or missing parts. Only use manufacturer-approved replacement parts.
Replace the entire unit if it cannot be restored to satisfactory condition.
Before each use, perform the following inspections:
1. Check the surface of the pole for dirt, oil, or other matter.
Bekijk gratis de handleiding van Vestil CR-48-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CR-48-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2294 MB |
