Vestil CR-144-2 handleiding
Handleiding
Je bekijkt pagina 6 van 8
Rev. 5/3/2018 CR MANUAL
Copyright 2018 Vestil Manufacturing Corp. Page 6 of 8
Inspections:
Written records — before using the ram for the first time, make a written record of its appearance. Describe the
condition of the frame, pole, clamping bolts, carriage brackets, and the latch. Take photographs of each item and
add them to the record. Take photographs of all labels applied to the ram. Describe where each label is located. This
record establishes normal condition. When conducting the following inspections, compare your observations to the
record to determine if a component is in normal condition. Do not use the carpet ram unless every component is in
normal condition. Cosmetic changes, like damaged paint/powder coat do not constitute changes from normal
condition. However, touchup paint should be applied to all affected areas as soon as damage occurs.
Before each use — perform the following inspections.
1. Check the surface of the pole for dirt or other matter.
2. Examine hardware & fasteners, including but not limited to bolts, nuts, pins, and latch.
3. Examine pole, back plate weldment, and pole clamp for looseness or excessive wear, corrosion/rusting,
damage, and metal fatigue.
4. Confirm that the carriage brackets are in satisfactory condition.
5. Check all labels (see “Labeling diagram” on p. 7). Replace labels that are damaged or not easily readable.
6. Examine the whole structure for rusting/metal erosion. Remove rust/corrosion with a steel bristle brush or
steel wool. Clean the area and apply touchup paint.
Annual evaluation — At least once per year, authorized inspection personnel should use the carpet pole to list a
full capacity load. Afterwards, conduct a Frequent Inspection to confirm that the product is in normal condition.
Maintenance:
End-users should implement a maintenance program to ensure that the product functions properly and is
adequately maintained. The OSHA “General Industry” standard for “Powered industrial trucks” (29 CFR 1910.178)
provides recommended maintenance procedures. The following steps should be utilized in conjunction with those
procedures. ONLY trained, authorized personnel or contractors should perform inspection, maintenance, and repair
work.
NOTE: The end-user is responsible for selecting and training employees to work on the carpet ram. “Work
on” means use, inspect, and maintain the product.
Step 1: Tag the ram “Out of Service.”
Step 2: Remove dirt or other matter from all surfaces.
Step 3: Conduct a “Before each use” inspection. If deformity, severe corrosion/rusting, or excessive wear is found,
DO NOT use the product. Permanently remove it from service.
Step 4: Perform all necessary adjustments, replacements and/or repairs but DO NOT modify the ram.
NOTE: The reader should understand the significant difference between necessary adjustments and repairs,
and modifications. An “adjustment” is a simple correction that restores the device to normal condition, such
as tightening loose fasteners, or removing dirt or other debris from the surface. “Repair” refers to removing
worn parts and installing manufacturer-approved replacement parts. A “modification” is a change that alters
the carpet ram from normal condition, like bending the structural members or removing a part or several
parts. NEVER modify the device without the express, written approval of Vestil. Modifications might make
the device unsafe to use and automatically void the limited warranty (see p. 8).
Step 5: Make a dated record of any repairs, adjustments and/or replacements.
Bekijk gratis de handleiding van Vestil CR-144-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | CR-144-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1789 MB |
