Vestil BTT-5-36 handleiding
Handleiding
Je bekijkt pagina 8 van 10
0813 Rev. 5/20/2014 BTT, manual.doc
Copyright 2014 Vestil Manufacturing Co. Page 8 of 10
Product specifications
Dimensions and other specifications appear in the table below:
Model
Platform dimensions
(W x L x H)
Capacity
Possible angles of
inclination
Mode of
operation
Net
weight
BTT-6-36
28in. x 36in. x 2in.
71.1cm x 91.4cm x 5.1cm
600 lb.
272.7 kg
15°; 30°; and 45° Manual
60 lb.
27.3 kg
BTT-6-46
28in. x 46in. x 2in.
71.1cm x 116.8cm x 5.1cm
600 lb.
272.7 kg
15°; 30°; and 45° Manual
72 lb.
32.7 kg
BTT-5-36
28in. x 36in. x 5in.
71.1cm x 91.4cm x 12.7cm
500 lb.
227.3 kg
Adjustable from 0°
through 45°
Powered by
linear actuator
84 lb.
38.2 kg
BTT-5-46
28in. x 46in. x 5in.
71.1cm x 116.8cm x 12.7cm
500 lb.
227.3 kg
Adjustable from 0°
through 45°
Powered by
linear actuator
96 lb.
43.6 kg
BTT-10-36
28in. x 36in. x 3in.
71.1cm x 91.4cm x 7.6cm
1,000 lb.
454.5 kg
Adjustable from 0°
through 45°
Powered by
linear actuator
96 lb.
43.6 kg
BTT-10-46
28in. x 46in. x 3in.
71.1cm x 116.8cm x 7.6cm
1,000 lb.
454.5 kg
Adjustable from 0°
through 45°
Powered by
linear actuator
108 lb.
49.1 kg
Installation
To install the tilter, fasten it to the selected surface with
3
/
8
in. bolts and corresponding hardware of
appropriate length as determined by your building engineer. Insert an anchor bolt through each of the 4
bolt slots in the frame (see FIG. 6 below).
Using the tilter
Orient the load with its long axis parallel to the surface of the deck to prevent it from rolling
over the lip of the deck. DO NOT exceed the capacity, which is listed in the table on p. 3 and displayed on
label 287 (see “Label placement diagram” on p. 10).
Manually-actuated models (BTT-6-36 & BTT-6-46)
The deck of both manually-actuated models can be set in 4 positions:
1. Horizontal
2. 15 degrees to horizontal;
3. 30 degrees to horizontal; and
4. 45 degrees to horizontal.
To change the angle of the deck, lift the deck by the handle then seat the crossbar in the appropriate slots
in the frame. The angle of inclination corresponding to each set of slot is diagrammed below.
Slot 1 = 15° inclination
Slot 2 =
30° inclination
Slot 3 = 45° inclination
Crossbar support
Deck
Handle
Deck
lip
A
nchor bolt holes
2
3
1
NOTE: User should be able to
comfortably lift 40
pounds. Ask for
assistance, if
necessary, to lift the
deck.
FIG. 6: Installation and use
Bekijk gratis de handleiding van Vestil BTT-5-36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | BTT-5-36 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2368 MB |
