Vestil BC-4 handleiding

11 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 11
Page 9 of 11
Copyright 2010 Vestil Manufacturing Corp.
UMaintenance and InspectionsU:
A designated person must verify that the clamp complies with all regulations, codes, and standards that apply to
“Under-the-Hook Lifting Devices” in the location where the clamp is used. T he person(s) designated to conduct
inspections must do so
UbeforeU the clamp is used for the first time, and UEACHU time it is installed for use.
Inspections:
The end-user is responsible for pe rforming in spections as recommended i n ASME B30.20. Th e
standard categori zes examinations b ased on regu larity of p erformance. Highlights of the recommended
inspection proce dures a ppear b elow. UHowever, the full pro cedures (i n the publish ed standard) should be
followedU.
DO NOT use a clamp that is structurally damaged. Structural damage includes, but is not limited
to, bendin g, warping, cracking or oth er deform ation of one or m ore of the spacers, clamping arms, o r of the
threaded shaft (see FIG. 1A on p.4). Restore the clamp to normal operating condition BEFORE using it again.
UInspections Before & During EVERY lift U: visual examination mu st be perfo rmed by the op erator pri or t o AND
during each lift. In particular, the operator should inspect for:
1. Debris on the load surfaces; AND
2. Condition and operation of the controls.
UFrequent In spectionsU: the spe cific meaning of “frequent” varies from daily to monthly dep ending on the service
classification (normal, h eavy, severe, and sp ecial/infrequent) of the cla mp. Definitions of the servi ce
classifications appear in ASME B30.20. Th e operator or other designated person(s) should visually inspect the
clamp for:
1. Deformation, cracking, or excessive wear of any part of the clamp;
2. Operating mechanisms for conditions that interfere with proper function; AND/OR
3. Loose or missing fasteners, stops or nameplates.
UPeriodic InspectionsU: complete visual inspections performed AND recorded by a qualified person. The inspection
should specifically look for:
1. Loose bolts or fasteners;
2. Excessive wear of friction pads, linkages, and other mechanical parts; AND/OR
3. Excessive wear at th e points where the clamp connects to the h oist hook, and load support
clevises or pins.
Maintenance: the en d-user must implement a maintenance program to en sure the proper function and safety of
the clamp. A qualified person may establish a program that is used in preference to the maintenance procedures
described below. However, if you apply the procedure that follows, complete EVERY step
Ueach time U
maintenance is performed.
Vestil DOES NOT p rovide replacement parts fo r the beam clamp. Any conditi on which requires
replacement parts can ONLY be corrected by purchasing a new clamp.
ONLY q ualified persons may perform maintenance on the clamp. A qualified person is someone
“who, by p ossession of a re cognized degree i n a n appli cable field o r certificate of p rofessional trai ning, and
experience, has successfully demonstrated the ability to solve or resolve problems relating to the subject matter
[beam clamp] and work [use of the beam clamp].” See ASME B30.20-0.2-2003.
UStep 1U: All sources of power must be disconnected, locked out and tagged, “Out of Service.”
UStep 2U: Disconnect the clamp from the hoist hook and tag it, “Out of Service.”
UStep 3 U: Perform all adjustments indi cated as necessary duri ng any ins pection (every lift, frequent, or
periodic).
UStep 4U: If other conditions exist whi ch require new/replacement parts to repai r, contact Vestil to orde r a
Unew clampU. UDeformity, corrosion, rusting, or excessive wear of fasteners, clamping a rm(s), and/or the
attachment spacer or any other spacer warrants immediate replacement of the clamp)U.

Bekijk gratis de handleiding van Vestil BC-4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkVestil
ModelBC-4
CategorieNiet gecategoriseerd
TaalNederlands
Grootte6808 MB