Vestil BC-4 handleiding
Handleiding
Je bekijkt pagina 8 van 11
Page 8 of 11
Copyright 2010 Vestil Manufacturing Corp.
hoist chain (or rope) so that the interior of the hoist hook and the attachment spacer are no longer in contact (see
Photos 11 and 12).
UDO NOT disconnect the clamp from the beam until you appropriately immobilize the beam to
prevent it from rolling, falling over, or moving in an uncontrolled manner
U.
In the follo wing photographs, the beam weighs little and lacks dangerous p rojections that could cause injury. It
can easily be controlled by the ope rator. If you can not control BOTH the clamp and b eam without difficulty, find
someone to help you. However, despite these suggestions
Uyou should always use the procedures developed by
your employer for safely handling beamsU.
UStep 9U: Disengage the clamp. T urn the h andle counterclockwise to o pen the clamp and release the beam.
Raise the hoist high enough that the clamp no longer contacts the beam, and then disconnect the clamp from
the hoist.
You should UfullyU open the clamp to prevent accidental or partial engagement of the beam.
11
12
13 14
15
Bekijk gratis de handleiding van Vestil BC-4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | BC-4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6808 MB |
