Handleiding
Je bekijkt pagina 14 van 29
EN - 14
may heat up to temperatures of more than
90°C.
• The hose must not be cracked, torn, bent
or folded.
• Keep the hose clear of sharp corners and
objects that could move.
• Before you assemble the connection, you
must make sure the hose is not damaged.
Use bubbly water or leakage fluids to
perform the check. Do not use a naked
flame to check for gas leakage.
• All metal items that are used during gas
connection must be free from rust. Check
the expiry date of any components used for
connection.
Points that must be checked during fixed
gas connection assembly
The method used to assemble a fixed gas
connection (gas connection made by threads,
e.g. a nut) varies according to the country
you are in. The most common parts for your
country will be supplied with your appliance.
Any other parts required can be supplied as
spare parts.
During connection, always keep the nut on the
gas manifold fixed while rotating the counter-
part. Use appropriately-sized spanners for a
safe connection. For surfaces between different
components always use the seals provided in
the gas conversion kit.
The seals used during connection should also
be approved to be used in gas connections. Do
not use plumbing seals for gas connections.
Remember that this appliance is ready to be
connected to the gas supply in the country for
which it has been produced. The main country
of destination is marked on the rear cover of
the appliance. If you need to use it in another
country, any of the connections in the figure
below may be required. In such a case, contact
local authorities to learn the correct gas
connection.
Gas pipe
Gas pipe
Seal
Seal
Hose
fitting
Adapter
Gas hose
with collar
Mechanical
gas hose
Gas pipe
Gas
pipe
Seal
Mechanical gas
hose
Mechanical
gas hose
The Cooker must be installed and maintained
by a suitably qualified gas registered
technician in accordance with current safety
legislation.
WARNING: Do not use a naked flame to
check for gas leaks.
2.4 Gas Conversion (if available)
Your appliance is designed to be operated
with LPG/NG gas. The gas burners can be
adapted to different types of gas, by replacing
the corresponding injectors and adjusting the
minimum flame length suitable to the gas
in use. For this purpose, the following steps
should be performed.
Bekijk gratis de handleiding van Vestel Retro SF 84011 DG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | Retro SF 84011 DG |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 2670 MB |
