Vestel BMA 6402 X WIFI handleiding
Handleiding
Je bekijkt pagina 25 van 35
EN - 21
Once the End light is on, press
the On/Off key to turn off the
machine.
7.3. Switching off the Machine
Once the program end and the End light
turns on, press the On/Off Key to switch off
the machine.
Unplug it. Turn off the water tap.
NOTE: Do not open the door until the
program finishes.
NOTE: At the end of the washing
program, you can leave the door of the
machine ajar to speed up the drying
process.
NOTE: If you open the door of the
machine or if power gets cut during the
washing cycle, the program will resume
once the door has been closed or the power
has recovered.
Warning Sound Check (depends on the
model)
Follow the steps below to change the
volume of the warning sound:
1. Press the On/Off key (1) to turn on your
machine. Press the Option (6) and Confirm
(7)
keys
simultaneously for 3 seconds.
2. When the sound setting is detected, a
long warning sound will be heard and the
machine will show the last level set, which
will be between “S0” and “S3”.
3. Press the Confirm key (7) to turn the
volume down. Press the Option key (6) to
turn the volume up.
4. Switch off the machine to save the
volume selected.
“S0” means all sounds are off. Factory
default is “S3”.
Power Saving Mode
Follow the steps below to enable or disable
the power saving mode:
1. Press the On/Off key (1) to switch on
your machine. Press the Program (2)
and Option (6)
keys
simultaneously for 3
seconds.
2.
3 seconds later, the machine will show
the last setting, which is “IL1” or “IL0”.
3. “IL1” will be displayed when the Power
Saving Mode is enabled. In this mode,
the inner light (if available) will turn off 2
minutes after the door is opened and the
machine will switch off in 15 minutes if no
key is pressed to save power.
4. “IL0” will be displayed when the Power
Saving Mode is disabled. If the Power
Saving Mode is disabled, the inner light
will remain on as long as the door is open
and the machine will remain on unless it is
switched off by the user.
5. Switch off the machine to save the setting
selected.
Power Saving Mode is enabled in default
factory settings.
Active Ion Technology (Depends on the
Model)
This function provides extra hygiene
thanks to the Ion Technology. It works as
an independent program. To enable this
function, press the Option key (6) for 3
seconds in ready state. After 3 seconds,
“Ion” message will be displayed to indicate
that the Active Ion Technology function
has been enabled. Release the key once
the “Ion” is displayed. The Active Ion
Technology function will be cancelled
automatically in 24 hours unless the user
intervenes.
NOTE:
The Active Ion Technology
function will be cancelled if the machine is
switched off.
NOTE:
The Active Ion Technology
function does not run together with any
program.
NOTE: If the Active Ion Technology
function is enabled, the Active Ion
Technology warning LEDs will flash when
the door is opened.
Bekijk gratis de handleiding van Vestel BMA 6402 X WIFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | BMA 6402 X WIFI |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4244 MB |
