Handleiding
Je bekijkt pagina 13 van 21
EN - 13
the information related to appropriate gas types
and appropriate gas injectors in
the technical data table. Check that the feeding
gas pressure matches the values on the technical
data table, to be able to get the most efficient
use and to ensure the minimum gas
consumption. If the pressure of used gas is
different than the values stated or is not stable in
your area, it may be necessary to assemble an
available pressure regulator on the gas inlet. You
should contact an authorised service centre to
make these adjustments.
Points that must be checked during flexible hose
assembly:
• If the gas connection is made by a flexible
hose fixed onto the gas inlet of the hob, it
must be fixed on by a pipe collar.
• Connect your appliance with a short and
durable hose that is as close as possible to
the gas source.
• The permitted maximum length of the hose
is 1.5 m.
• The device should be connected in line with
the relevant local gas standards.
• The hose must be kept clear of areas that
may heat up to temperatures of more than
90°C.
• The hose must not be cracked, torn, bent or
folded.
• Keep the hose clear of sharp corners
and objects that could move.
•
•
Before you assemble the connection, you
must make sure the hose is not damaged.
Use bubbly water or leakage fluids to perform
the check. Do not use a naked flame to check
for gas leakage. All metal items that are used
during gas connection must be free from rust.
Check the expiry date of any components
used for connection.
Points that must be checked during fixed gas
connection assembly:
The method used to assemble a fixed gas
connection (gas connection made by threads,
e.g. a nut) varies according to the country you
are in. The most common parts for your country
will be supplied with your appliance. Any other
parts required can be supplied as spare parts.
During connection, always keep the nut on the
gas manifold fixed while rotating
the counter-part. Use appropriately-sized
spanners for a safe connection. For surfaces
between different components always use the
seals provided in the gas conversion kit.
The seals used during connection should also be
approved to be used in gas connections. Do not
use plumbing seals for gas connections.
Remember that this appliance is ready
to be connected to the gas supply in the country
for which it has been produced. The main
country of destination is marked on the rear
cover of the appliance. If you need to use it in
another country, any
of the connections in the figure below may be
required. In such a case, contact local
authorities to learn the correct gas connection.
Gas pipe
Gas pipe
Gas pipe
Seal
Seal
Seal
Hose
fitting
Hose
fitting
Hose
fitting
Hose
fitting
Gas hose
with collar
Gas hose
with collar
Mechanical
gas hose
Mechanical
gas hose
Gas pipe
Seal
Hose
fitting
Hose
fitting
Gas pipe
Hose
fitting
Mechanical
gas hose
The Cooker must be installed and maintained
by a suitably qualified gas registered
technician in accordance with current safety
legislation.
WARNING: Do not use a naked flame to
check for gas leaks.
Gas Conversion (Ii available)
Your appliance is designed to be operated
Bekijk gratis de handleiding van Vestel AO-6104 YRS DG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | AO-6104 YRS DG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1678 MB |
