Handleiding
Je bekijkt pagina 40 van 87
English - 39 -
rst satellite option will appear as
On. Highlight that satellite option
and press OK. Set the parameters
corresponding to your system and
correct satellite and press the Back/
Return button to return to the
satellite selection screen. Highlight
Next Step and press OK to proceed
with the SatcoDX channel list
installation. If the selected satellite is
not correct for SatcoDX installation,
a warning dialogue will be displayed
on the screen. The satellite/s that
can be selected will be listed. Press
OK to close the dialogue and press
OK or the Back/Return button to
return to satellite selection screen.
Then set the satellite accordingly.
Satellite Add: Add satellite/s on
which you want to perform a channel
scan. This menu option will be active,
if Channel Installation Mode is set
to General Satellite.
Satellite Update: Search for any
updates by repeating the previous
scan with the same settings. You
will also be able to congure these
settings before the scan. Depending
on the Channel Installation Mode
setting, this option may not be
available or named differently
depending on the available services.
Highlight the satellite and press
OK to congure detailed satellite
parameters. Then press the Back/
Return button to return to the
satellite selection screen. Highlight
Next Step and press OK to proceed.
Satellite Manual Tuning: Start a
manual satellite scan. Highlight the
satellite and press OK to congure
detailed satellite parameters. Then
highlight Next Step and press OK
to proceed.
Note: If you have performed TKGS
installation, you can remove the
restrictions on conguring the chan-
nel list using the Operate Mode
option in the TV options > Advan-
ced Options > TKGS menu. Set this
option to TKGS O or Customisable
to enable channel list conguration.
Auto Channel Update: Turn the
auto channel update function on
or o.
Channel Update Message: Turn the
channel update message function
on or o.
Note: Some options may not be ava-
ilable and appear as greyed out de-
pending on the operator selection and
operator related settings.
Inputs
Show or hide an input terminal, change
the name of an input terminal, and
congure the options for HDMI CEC
(Consumer Electronic Control) function
and display the CEC device list.
Display and Sound
Picture
Picture Mode: Set the picture mode
to suit your preference or require-
ments. Picture mode can be set to
Bekijk gratis de handleiding van Vestel 55UG9750, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 55UG9750 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 8815 MB |
