Handleiding
Je bekijkt pagina 20 van 81
English - 19 -
14. Google Cast built-in always
available
Select your Google Cast availability
preference. If set as On your TV will
be detected as a Google Cast device
and allow Google Assistant and other
services to wake your TV up to respond
to Cast commands, even when on
standby mode and the screen is o.
15. Tuner Mode
The next step is the selection of
the tuner mode. Select your tuner
preference to install channels for
Live TV function. Antenna, Cable
and Satellite options are available.
Highlight the option that corresponds
to your environment and press OK or
Right directional button to proceed. If
you don’t want to perform a tuner scan
highlight Next and press OK.
When the channel scan with the
selected tuner is completed, the
installation wizard will bring you
back to this step. In case you want
to continue scanning channels with
another tuner, you can proceed as
explained below.
Antenna
If the Antenna option is selected,
you can choose to search for digital
terrestrial and analogue broadcasts.
On the next screen highlight the option
you prefer and press OK to start the
search.
While the search continues you can
press the Back/Return button to stop
the search. Then highlight Skip Scan
and press OK or the Right directional
button to complete the setup. The
channels that have already been found
will be stored in the channel list.
Note: If the country selected does not have analogue
broadcasts, analogue channels may not be searched.
Cable
If the Cable option is selected, you
can choose to search for digital cable
and analogue broadcasts. If any,
available operator options will be
listed on the Select Operator screen.
Otherwise this step will be skipped.
You can select only one operator from
the list. Highlight the desired operator
and press OK or the Right directional
button to proceed. On the next screen
highlight the option you prefer and
press OK to start the search. If one
of the digital channel search options
is selected, a configuration screen
will be displayed next. Scan Mode,
Frequency (KHz), and Network ID
options may need to be set. To perform
a full scan set the Scan Mode as Full
or Advanced if available. Depending
on the selected operator and/or the
Scan Mode setting, some options may
not be available to be set.
Note: If the country selected does not have analogue
broadcasts, analogue channels may not be searched.
D-Smart Installation
You can search and store D-Smart
cable channels. Set the tuner mode
as Cable and press OK or the Right
directional button. On the next screen
set the operator accordingly. Press
Bekijk gratis de handleiding van Vestel 55QG9950, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 55QG9950 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 8518 MB |
