Handleiding
Je bekijkt pagina 36 van 75
English - 35 -
Virtual HDR
Manipulates colour, saturation and dynamic contrast, basically converts Standard Dynamic
Range picture to High Dynamic Range picture. Set to On to enable.
Advanced Settings
Dynamic Contrast
You can change the dynamic contrast ratio to desired value.
Colour Temp
Sets the desired colour temperature value. Cool, Normal, Warm and Custom options are
available.
White Point
If the Colour Temp option is set as Custom, this setting will be available (will be located under
the Colour Temp setting). Increase the ‘warmth’ or ‘coolness’ of the picture by pressing the
Left or Right buttons.
Blue Stretch
White colour enhancement function that makes white colour more cooler in order to make more
bright picture. Set as On to enable.
Micro Dimming
Low, Medium, High and O options are available. While Micro Dimming is active, it will
enhance contrast locally for each defined zone.
Noise Reduction
Low, Medium, High and O options are available. If the signal is weak and the picture is noisy,
use the Noise Reduction setting to reduce the amount of noise.
MEMC
Press left/right buttons to set MEMC to Low, Medium, High or O. While MEMC is active, it will
optimise the TV’s video settings for motional images to acquire a better quality and readability.
MEMC Demo
When the MEMC option is set to Low, Medium or High, this option will be available. Highlight
this option and press OK to activate the demo mode. While demo mode is active, the screen
will be divided into two sections, one displaying the
MEMC activity, the other displaying the
normal settings for TV screen. Press OK again to cancel.
Film Mode
Films are recorded at a dierent number of frames per second to normal television programmes.
Set to Auto when you are watching films to see the fast motion scenes clearly.
Skin Tone
Skin tone can be changed between -5 and 5.
Colour Shift
Adjust the desired colour tone.
Colour Tuner
Opens colour tuner settings. Set the Colour Tuner as Enabled to adjust the Hue, Colour and
Brightness values manually.
Colour Space
Set your colour space preference. Auto, On, REC709, BT2020, ADOBERGB, DCI_P3, and
O options are available.
Gamut Mapping
You can use this option to set the range of colours displayed on your TV screen. When set as
On, colours are set according to the source signal. When set as O, the TV’s maximum colour
capacity is used by default (recommended option).
Note: This option may not be available depending on the TV model and its features.
Gamma
You can use this option to set your gamma preference. Press the Left/Right directional buttons
to set to Normal, Bright or Dark.
Note: This option may not be available depending on the TV model and its features and you may not be able to change
this setting depending on the current content.
HDMI Full Range
While watching from a HDMI source, this feature will be visible. You can use this feature to
enhance blackness in the picture.
11 Point White
Balance Correction
White balance feature calibrates TV’s colour temperature in detailed grey levels. By visually or
measurement, grey scale uniformity can be improved. Adjust the strength of the Red, Green,
Blue colours and Gain value manually. Highlight this option, press OK, and then set the desired
white balance correction option (11 point or 2 point) to Enabled to turn it on.
Reset
Resets the current picture mode settings to factory default settings.
Bekijk gratis de handleiding van Vestel 50QT9850, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 50QT9850 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 8025 MB |
