Handleiding
Je bekijkt pagina 21 van 78
English - 20 -
Mode, Frequency (KHz), Modulation,
Symbol Rate (Ksym/s), Network ID
options may need to be set. To perform
a full scan set the Scan Mode as
Advanced, Quick or Full if available.
Depending on the selected operator
and/or Scan Mode some options may
not be available to be set.
Note: If the country selected does not have
analogue broadcasts, analogue channels
may not be searched.
D-Smart Installation
You can search and store D-Smart
cable channels. Set the tuner mode
as Cable and press OK or the Right
directional button. On the next screen
set the operator accordingly. Press
OK or the Right directional button to
proceed.
Once you are done with setting
available options, press the Right
directional button to proceed. The
TV will start to search available
broadcasts.
Satellite
If the Satellite option is selected,
the Antenna Type screen will be
displayed next. If you have a Direct
satellite system, you can proceed to
the next step quickly by selecting the
Next option here. Highlight More
and press OK to set the antenna type
manually. Single, Tone Burst, DiSEqC,
and Unicable options are available.
Highlight the antenna type that
corresponds to your satellite system
and press OK or the Right directional
button to proceed to the next step.
Next screen will be the Select
Operator screen. You can select only
one operator from the list. Highlight
the desired operator and press OK
or the Right directional button to
proceed. Some of the options in the
following steps may be preset and/or
additional steps may be added or some
steps may be skipped depending on the
selected operator in this step. Check
the parameters in each step before
proceeding and adjust if necessary. You
can highlight General and press OK or
Right directional button to proceed
with normal satellite installation.
D-Smart Installation
You can search and store D-Smart
satellite channels. Set the tuner mode
as Satellite. On the next screen
set the antenna type as mentioned
above. Then Select Operator screen
will be displayed. Select the operator
accordingly and press OK or the
Right directional button to proceed.
TKGS Installation
Note: TKGS stands for Türksat Kanal
Güncelleme Sistemi. The country option
should be set as Turkey in the previous
steps of the initial setup process.
• Set the Tuner Mode as Satellite.
• Set the Antenna Type in accordance
with your satellite system, as
mentioned above.
• Set the Operator as TKGS.
Bekijk gratis de handleiding van Vestel 24HA9950M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestel |
| Model | 24HA9950M |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 7467 MB |
