Verto 52G584 handleiding
Handleiding
Je bekijkt pagina 17 van 112
17
Do not cut branches when climbing up the tree. Do not stand on
ladder, platforms, logs or positions that may cause loss of balance
and control over the chain saw. Do not cut above level of your
shoulders. Always hold the chain saw with both hands.
SAFE WORK WITH CHAIN SAW
Never use the chain saw during rain and in moisture. Whenever
the extension cord is damaged, remove its plug from mains socket
immediately. Never use damaged power cord.
All parts should be assembled properly and full requirements
that ensure safe chain saw operation. Any damaged protective
part should be repaired or replaced immediately.
OPERATION AND MAINTENANCE
Unplug the power cord from the mains socket before commencing
any activities related to installation, adjustment, repair or
maintenance.
STORAGE
• Always keep the chain saw clean.
• Do not use water or any other liquid for cleaning.
• Clean plastic parts of the casing with brush or soft cloth.
• Clean ventilation holes in motor casing regularly.
• Check condition of carbon brushes of electrical motor periodically.
• When not used, the chain saw should be clean and stored on
horizontal surface.
• Store the saw in dry place, beyond reach of children.
• You can proceed with maintenance actions only described within
this instruction manual. Any other action can be carried out only by
authorized service.
MAINTENANCE OF THE GUIDE BAR AND CHAIN
Check condition of the guide bar and chain every 5 hours of the saw
operation.
• Loosen and unscrew the protection nut (5).
• Remove the guide bar cover (6), disassemble the guide bar (13) and
chain (14).
• Clean oil holes and groove (d) in the guide bar (13) (g. N).
• Lubricate tip chain wheel of the guide bar (15) through the hole (e)
located on the guide bar tip (g. O).
• Check condition of the chain (14).
CHAIN SHARPENING
Pay attention to cutting tools. The chain should be clean and sharp,
that will ensure ecient and safe operation. Operating the saw with
blunt chain causes quick wear of the chain, guide bar and driving
chain wheel, and breaking the chain in the worst case. That is why it is
important to sharpen the chain on time.
Chain sharpening is a complex operation. Sharpening the chain by
yourself will require skills and use of special tools. It is recommended
to entrust sharpening the chain to qualied persons.
All faults should be repaired by service workshop authorized by the
manufacturer.
TECHNICAL PARAMETERS
RATED PARAMETERS
Chain Saw
Parameter Value
Supply voltage 230V AC
Current frequency 50Hz
Rated power 2000 W
Chain linear speed (no load) 12,1 m/s
Chain oil tank capacity 280 ml
Chain oil SAE 10W-30
Oil feed system Automatic pump
Chain wheel (teeth x pitch) 7T x 0.375” (9.53mm)
Type of guide bar
DH 16-9D-50-57P (16”)
standard
Type of chain CARLTON N1C-BL-57E B
Chain pitch 0.375” (9.53mm)
Chain thickness 0.05” (1.27mm)
Guide bar working length 405 mm
Dimensions (LxWxH) (w/o guide bar) 440 x 245 x 195 mm
Protection class II
Weight (w/o guide bar and chain) 5.55 kg
Year of production 2018
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp
A
= 96 dB(A) K=3dB(A)
Sound power: Lw
A
= 105,3 dB(A) K=3dB(A)
Vibration acceleration a
h
:
front handle: a
h
= 3,25 m/s
2
K=1,5 m/s
2
ENVIRONMENT PROTECTION
Do not dispose of electrically powered products with
household wastes, they should be utilized in proper plants.
Obtain information on waste utilization from your seller or
local authorities. Used up electric and electronic equipment
contains substances active in natural environment. Unrecycled
equipment constitutes a potential risk for environment and
human health.
* Right to introduce changes is reserved.
“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Spółka komandytowa
with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs,
that all copyrights to this instruction (hereinafter Instruction), including, but not
limited to, text, photographies, schemes, drawings and layout of the instruction,
belong to Grupa Topex exclusively and are protected by laws accordingly to
Copyright and Related Rights Act of 4 February 2004 (ustawa o prawie autorskim
i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modications for commercial purposes of the
entire Instruction or its parts without written permission of Grupa Topex are strictly
forbidden and may cause civil and legal liability.
Bekijk gratis de handleiding van Verto 52G584, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Verto |
| Model | 52G584 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17843 MB |
Caratteristiche Prodotto
| Kleur van het product | Green, Stainless steel |
| Geluidsniveau | 105.3 dB |
| Stroombron | AC |
| Vermogen | 2000 W |
| Stationair toerental | 12.1 RPM |
