Vertiv VR3100TAA handleiding

30 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 30
3 Pre-installation Preparation
3.1 Equipment Inspection
Upon receiving a Vertiv™ VR rack system, inspect the packaging for any signs of mishandling or damage. If any damage is
noted, notify your local Vertiv™ representative and your carrier immediately.
3.2 Unloading the Rack andMovingtoInstallationLocation
Before unloading, note the weight of the model in Table 2.1 on page3 .
The following tools/equipment are required to un-pack and move the rack:
pallet jack or forklift
utility knife or scissors
13-mm socket and ratchet or 13-mm wrench
14-mm socket and ratchet or 14-mm wrench
WARNING! Only trained service personnel should be used to remove the rack from the pallet. Also, be sure
you have a sufficient number of service personnel. Do not attempt to move racks by yourself.
WARNING! Be careful when moving racks before installation. Sudden stops and starts, excessive force,
obstructed routes, and uneven floor surfaces may cause the rack to topple over.
CAUTION: Use at least two people when moving the unit.
1. Using a pallet jack or forklift, move the rack on its pallet to the installation location.
2. Cut the shrink wrap and remove all packaging.
3. Use a 13-mm socket or a 13-mm wrench to remove the anchor-bracket hardware that secure the 2 anchor
brackets to the shipping pallet, one in the front and one at the rear of the rack. Each bracket is secured by four
bolts.
If the brackets will be used to anchor the rack to the floor, and set aside for attachment when the rack is in
its final location.
4. Make sure that the leveling feet are in the raised position, see Leveling Feet Adjustment on page7 .
5. Use a pallet jack or forklift to raise the rack off the shipping pallet.
6. Slide the shipping pallet out from under the rack.
3 Pre-installation Preparation
5
Vertiv™ VR Installer/User Guide

Bekijk gratis de handleiding van Vertiv VR3100TAA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkVertiv
ModelVR3100TAA
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4208 MB

Caratteristiche Prodotto

Kleur van het productBlack, Transparent
Gewicht127000 g
Breedte600 mm
Diepte1100 mm
Hoogte2000 mm