Vertiv VR3100TAA handleiding
Handleiding
Je bekijkt pagina 10 van 30
7. Position the rack in the installation location using the forklift, with a pallet jack, or with 2 or more people rolling
the rack on its casters.
• If using the casters to move the rack, make sure that the leveling feet are raised before moving, see
Leveling Feet Adjustment on the facing page .
8. Position the rack, lower the leveling feet using the T30 Torx tool or 14-mm wrench, and level the rack.
• If using the shipping/anchoring brackets to bolt the rack to the floor, make sure that the rack is level
before tightening all the anchor-bracket hardware, see Leveling Feet Adjustment on the facing page .
Figure 3.1 Anchor brackets inside front/rear of rack
Item Description
1 Bolt holes for securing anchor bracket to pallet and/or floor
2 Bolt holes for securing anchor bracket to rack (3 typical)
3 Pre-installation Preparation
6
Vertiv™ VR Installer/User Guide
Bekijk gratis de handleiding van Vertiv VR3100TAA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vertiv |
| Model | VR3100TAA |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4208 MB |
Caratteristiche Prodotto
| Kleur van het product | Black, Transparent |
| Gewicht | 127000 g |
| Breedte | 600 mm |
| Diepte | 1100 mm |
| Hoogte | 2000 mm |