Vertiv VR3100TAA handleiding

Handleiding

123456789101112131415161718192021222324252627282930/ 30

Afdrukken

Je bekijkt pagina 15 van 30

4.2 Reversing the door handle

1. Remove the Phillips-head bolt from the swing-handle retainer on the inside of the door.

2. Tilt the handle outward and lift up to remove it from the door.

3. Remove the Phillips-head cam retaining bolt, rotate the cam 180° and re-install cam retaining bolt.

4. After reversing the door, reinstall the swing handle by sliding downward into door and tilting inward.

5. Re-install swing-handle retainer and Phillips head bolt.

Figure 4.2 Door handle components

Item Description

1 Retaining bracket for handle

2 Screws

3 Paw spacer

4 Handle paw

5 Paw screw

4.2.1 Operating Door Handle

The door swing handles have been installed at the manufacturer. No additional assembly is required. To operate the swing

handle, lift up at the bottom of the handle then swing the handle to the right to open. The handle must be kept in this position

to close the door. Return the handle to the initial position and use the key provided to lock the handle. The lock on the side

panels will accept the same key.

The swing handles and doors are reversible. See Reversing the door handle above .

4 Installation and Assembly Procedures

11

Vertiv™ VR Installer/User Guide

123456789101112131415161718192021222324252627282930/ 30

Bekijk gratis de handleiding van Vertiv VR3100TAA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Niet gecategoriseerd